How can the cavities of a car’s A‑pillar, B‑pillar, and C‑pillar be treated to reduce vibration and noise? Let’s talk about the BUFF series of foam‑based damping components.
Published Time:
2026-10-22
The “whooshing” sound inside the car on the highway and the “thudding” when going over speed bumps often don’t come from the glass; instead, they travel along the vehicle’s cavities straight to your ears.
of the vehicle’s side panel A Column, B Column, C The interior of the pillar is not solid. To meet requirements for structural strength, cable routing, and weight reduction, numerous cavities are left between the sheet-metal components. These cavities act like conduits, channeling road and wind noise generated by the wheel arches, door sills, and lower door edges directly into the cabin. Without partitions to dampen these pathways, noise attenuation remains minimal, and the vibrations of the sheet metal itself are amplified.
Cut irregular-shaped parts according to the sheet metal surface mold.
Haoda Technology's car BUFF The series comprises foam‑based damping components specifically developed for such areas. It utilizes polyethylene, polyurethane, and rubber‑plastic foaming materials, formulated according to… A Column, B Column, C The column’s actual contoured surface is die‑cut and formed, then snapped into or adhered to a designated position within the cavity during assembly. The material’s closed‑cell structure and its resilience impose a degree of restraint on sheet‑metal vibrations, while also dividing an entire cavity section into multiple smaller segments, thereby interrupting the pathways for airborne sound transmission.
During the material selection phase, three key parameters are typically considered: expansion ratio, apparent density, and thickness. The expansion ratio determines the material’s final volume after it fills the cavity, while density and thickness directly influence the damping performance. For a given component, switching to a different density grade can result in measured sound pressure level curves that differ by several decibels. These factors must be evaluated iteratively, in conjunction with the overall vehicle‑level targets and the available installation space.
At the processing end, Haoda Technology’s Changzhou headquarters is equipped with large coating machines, multi-functional slitting machines, precision die-cutting machines, continuous die-cutting machines, and slitting machines. In addition, it features a high-speed, precision laminating and positioning slitting line that can integrate gluing, lamination, and die-cutting into a single process, thereby reducing deviations caused by repeated positioning. The deep-processing workshop’s production capacity… 150 Ten thousand pieces, annual glue application volume 120 Ten thousand square meters.
Acoustic matching can be performed in-house as an initial round.
Whether to immediately send the prototype to a third-party agency for testing is a dilemma many project teams face. Haoda Technology is equipped with NOR140 Sound level meter and SQUADRIGA II A portable sound‑analysis instrument can perform sound‑pressure‑level measurements during material selection and prototype comparison, and, when used in conjunction with a temperature‑and‑humidity cycling chamber, it enables assessment of the prototype’s performance under varying temperature and humidity conditions. By completing the initial screening stages in‑house, rather than sending samples for external testing, both costs and lead times can be kept more tightly under control.
The company was established in 2021 year 10 In [Month], the Jiangsu Provincial Engineering Technology Research Center for Automotive Vibration and Noise Reduction Components was established, and related material verification activities are conducted on this platform. The laboratory has been accredited by the China National Accreditation Service for Conformity Assessment.
It should be noted that, BUFF The series addresses issues along the transmission path. If the noise source originates in the tire tread, the wheel hub bearing, or the door seal itself, relying solely on damping materials within the cavity will yield limited results; in practice, projects typically involve a comprehensive analysis that considers both the source and the transmission path.
Keywords: